January 24, 2015
1 For
selecting Material, Click on Drop Down List and Select Load from the Material Library and Copper (annealed) and click on Load then Press OK, After this step
Substrate and Ground is created. After this we can see view (Substrate and
Ground) as like this, after selecting Free in drop down Menu and after rotating
the diagram
Note: - Length and Width of Substrate and Ground should be same. For this You can assigned only one variable for Length and width for respectively for Ground and Substrate.
Now
we have to create Patch, We create Patch same as we have already created
Substrate and Ground. Firstly Select New Brick and Press Escape and Set
Variable for Length, Width and Thickness as
Name- Patch
Xmin: wp/2 Xmax: -wp/2 (ws-Width of patch in mm)
Ymin: lp/2 Ymax: -lp/2 (ls-Length of patch in mm)
Zmin: h Zmax: h+t (thickness of patch)
Now
putting these variable Click on Preview and Provide value of Variable as wp=30,
lp=25 (Value of t and h are already assigned) and selected Material will be
Copper (annealed). Now Patch is created and Look like this.
Front
View
Free View
Till Now Substrate, Ground and Patch is created. Now it
is turn to create Feed.
1 We create feed same as we have already
created Substrate, Ground and Patch. In this we have determine the length of
Feeding. Create Feed same as Click on Create New Brick , Press ESC ,Set
Variable and provide input parameter for feed as
Name- Feed
Xmin: wf/2 Xmax: -wf/2 (ws-Width of feed in mm)
Ymin: -lg/2 or-ls/2 Ymax: -lp/2 (Length of feed in mm)
Zmin: h Zmax: h+t (thickness of feed)
Let see how length
of feed is calculated in this picture (In general way,only for understanding)
