January 23, 2015
After
Pressing ESC we will get this Screen, In this we have provide value as
Name- Substrate
Xmin: ws/2 Xmax: -ws/2 (ws-Width of Substrate in mm)
Ymin: ls/2 Ymax: -ls/2 (ls-Length of Substrate in mm)
Zmin: 0 Zmax: h (height of Substrate)
Now putting these variable Click on Preview and Provide
value of Variable as ws=40,ls=40 and hs=1.524 (Except value of hs, you can determine any value)
1 Now select Material, Click on Drop Down
List and Select Load from the Material Library and Select FR-4 (lossy) and
click on Load then Press OK
Now substrate has been created and we have
to repeat same process for creating Ground.
Click on Create Brick and Press ESC same as
discussed in Previous procedure . Now we will get Screen as previous Step . Now Assign
Variable for Ground as
Name- Ground
Xmin: wg/2 Xmax: -wg/2 (ws-Width of ground in mm)
Ymin: lg/2 Ymax: -lg/2 (ls-Length of ground in mm)
Zmin: 0 Zmax: -t (thickness
of ground)